at danets, we enhance your wireless experience: turbotenna 009XT

:: Home > RF Amplifier > TurboTenna 009XT

Unwire Apps

Build your own Hotspot

Bulk Pack Store

2.4GHz WiFi Antenna

TurboTenna 009XT Amplifier Booster

+27dBm WiFi Amplifier
Advanced RF circuitry design, delivering a gain with high signal-to-noise ratio.
Suitable for point-to-point and point-to-multipoint range coverage.

Features and Benefits

The TurboTenna 009XT Amplifier Booster is designed for use by professional systems integrators and system fabricators.
This unit is designed to operate properly using a standard 32mW or 100mW radio device such as a Buffalo access point with adjustable power output.
Compatible with 802.11b wireless networks
Made of high-quality, RF shielding metal casing.
Precision engineered for maximum signal strength and distance.
When determining total power add the radio output to the TX amplifier gain and subtract the RF cable loss between the radio and amplifier. This total should not exceed 500mW or +27dBm.
Example: A 32mW radio (+15dBm) with a short pigtail (-1dB) running to the TurboTenna 011GT amplifier at TX gain gain of 13dB would yield a total power output of +27dBm at the antenna port of the amp. You would then add the gain of the antenna minus any cable loss between the amp and antenna to determine your effective isotropic radiated power level or EIRP.

Specifications

	Operating Range:	2400-2500 MHz
	Operating Mode:	Bi-directional, half-duplex and auto-switching
	Transmit Gain:	20dB
	Transmit Input Power:	Range from +5dBm to +20 dBm. Normally +10dBm (10mW)
	Output Power:	500mW (+27dBm)
	Receive Gain:	12dB
	Receive Noise Figure:	3dB
	Frequency Response:	+/- 1dB
	RF Connector:	SMA reciprocal
	Impedance:	50 ohm
	DC Power:	DC 5V x 500mA, AC 110 ~ 240V Power Adaptor
	Operating Temperature:	-20 deg. C to 70 deg. C
	Operating Humidity:	95% relative humidity
	LED Indicator:	TX Red
	RF Cable:	Not included